Replacing the touch-screen
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the touch-screen board with the tabs on the display-panel
assembly and snap the touch-screen board in place.
2 Slide the display cables into their respective connectors on the touch-
screen board and close the latches to secure the cables.
3 Adhere the tapes that secure the display cables to the touch-screen
board.
Post-requisites
1 Follow the procedure from step 6 to step 8 in “Replacing the display
panel”.
2 Replace the display assembly.
3 Replace the wireless card.
4 Replace the battery.
5 Replace the base cover.
110
To Next Page
Loading...
