Create a USB recovery drive for
Windows
Create a recovery drive to troubleshoot and x problems that may occur with
Windows. An empty USB ash drive with a minimum capacity of 16 GB is required to
create the recovery drive.
NOTE: This process may take up to an hour to complete.
NOTE: The following steps may vary depending on the version of Windows
installed. Refer to the Microsoft support site for latest instructions.
1 Connect the USB ash drive to your computer.
2 In Windows search, type Recovery.
3 In the search results, click Create a recovery drive.
The User Account Control window is displayed.
4 Click Yes to continue.
The Recovery Drive window is displayed.
5 Select Back up system les to the recovery drive and click Next.
6 Select the USB ash drive and click Next.
A message appears, indicating that all data in the USB ash drive will be deleted.
7 Click Create.
8 Click Finish.
Reinstalarea Windows utilizând o unitate de
recuperare USB
AVERTIZARE: Acest proces formatează hard diskul şi elimină toate datele
din computer. Realizaţi copii de siguranţă ale datelor de pe computer înainte
de a începe această operaţie.
NOTIFICARE: Înainte de a reinstala Windows, asiguraţi-vă că computerul
dispune de peste 2 GB de memorie şi peste 32 GB spaţiu de stocare.
8
To Next Page
Loading...
