Removing the display panel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
Procedure
1. Remove the display cable from the routing guide inside the hinge cover.
2. Using a plastic scribe, release the tabs that secure the display-panel assembly to the display back-cover and antenna
assembly.
3. Lift the display-panel assembly off the display back-cover and antenna assembly.
Figure 36. Removing the display-panel assembly
1.
plastic scribe 2. display back-cover and antenna assembly
43
Removing the display panel 73
To Next Page
Loading...
