Removing the display cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
5. Follow the procedure from step 1 to step 4 in “Removing the display panel”.
Procedure
1. Peel off the tapes that secure the display cable to the display-panel assembly and sensor board.
2. Open the latches and disconnect the display cable from the display-panel assembly and the sensor board.
3. Lift the display cable off the display-panel assembly.
Figure 41. Removing the display cable
1.
display-panel assembly 2. latches (2)
51
Removing the display cable 83
To Next Page
Loading...
