book.book Page 54 Monday, October 8, 2012 4:17 PM
Procedure
1 Pull the pull-tab to disconnect the USB-board cable from the
USB-board connector.
2 Pull the pull-tab to disconnect the LAN-USB cable from the
system-board connector.
3 Make a note of the LAN-USB cable routing and remove the cable from the routing
guides on the computer base.
4 Peel off the LAN-USB cable from the computer base.
1
2
3 45
1 LAN-USB cable 2 system board
3 USB-board cable 4 pull-tab
5 USB board
54 | LAN-USB Cable
To Next Page
Loading...
