Replacing the back cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
CAUTION: Make sure that no cables are caught between the back cover and
the display-assembly base.
Align the tabs on the back cover with the slots on the display-assembly base and
snap the back cover into place.
Post-requisite
Replace the stand.
21
To Next Page
Loading...
