Removing the middle frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the hard drive.
4 Remove the system-board shield.
5 Remove the memory module.
6 Remove the wireless card.
7 Remove the antenna.
8 Remove the media-card reader.
9 Remove the power-button board.
10 Remove the microphone.
11 Remove the camera.
12 Remove the coin-cell battery.
13 Remove the fan.
14 Remove the heat sink.
15 Remove the speakers.
16 Remove the system board.
17 Remove the display panel.
18 Remove the rubber feet.
78
To Next Page
Loading...
