17 Remove the system board.
Identifier GUID-56AF6918-411B-424E-AE5D-32DE47A635B8
Status Released
Procedure
NOTE: Depending on the conguration you ordered, the appearance of the
middle frame may dier.
1 Press the tabs on the display converter cable (CONVERTER) and disconnect the
cable from the display panel through its slot on the middle frame.
2 Remove all of the cables from the routing guides on the middle frame.
NOTE: Note the routing of each cable as you remove them and the
order of removal so that you can reroute it correctly during the
replacement of the middle frame.
3 Remove the 11 screws (M3x5) that secure the middle frame to the display panel.
4 Lift the middle frame o the display panel.
105
To Next Page
Loading...
