Dell Inspiron 24 5000 - Replacing the System-Board Shield; Post-requisites for System-Board Shield Replacement

Identifier GUID-5274B19C-AEEA-4EF8-952E-C1CDE89980E4
Status Released
Replacing the system-board
shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-A37B938C-961A-47B0-AA77-0269FEA026FD
Status Released
Procedure
1 Align the screw holes on the system-board shield with the screw holes on the
middle frame.
2 Replace the ve screws (M3x5) that secure the system-board shield to the
middle frame.
Identifier GUID-3AF6ABC8-B9EC-4B01-A8E8-B63F09F90FF1
Status Released
Post-requisites
Replace the back cover.
51