Identifier GUID-BF7F1ECA-BC62-4949-B1BE-EC64E351719E
Status Released
Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B921E997-CD1E-4A7D-96D6-723B6E2D1F99
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
4 Remove the system-board shield.
Identifier GUID-A8CDAD08-077C-4EB6-AAD8-0E0FD6FE9AEF
Status Released
Procedure
1 Disconnect the side I/O-board cable (MB-SUSBC) from the system board and
remove it from the routing guide on the middle frame.
2 Disconnect the speaker cable (SPEAKER) from the system board and remove it
from the routing guide on the middle frame.
3 Remove the four screws (Washer-type M3x4) that secure the speakers to the
middle frame.
4 Remove the speaker cable (SPEAKER) from the routing guide on the I/O
bracket.
55
To Next Page
Loading...
