Identifier GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Status Released
Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B3DDAC26-FDE3-49CF-B328-1DB4505F6A70
Status Released
Procedure
1 Align the screw holes on the speakers to the screw holes on the middle frame.
2 Route the speaker (SPEAKER) cable through the routing guide on the I/O
bracket.
3 Replace the four screws (Washer-type M3x4) that secure the speakers to the
middle frame.
4 Reconnect the speaker cable (SPEAKER) from the system board and route the
cable through the routing guide on the middle frame.
5 Reconnect the side I/O-board cable (MB-SUSBC) from the system board and
route the cable through the routing guide on the middle frame.
Identifier GUID-FC905C12-5D10-4857-AB3A-4AD62CEE2D88
Status Released
Post-requisites
1 Replace the system-board shield.
2 Replace the inner frame.
3 Replace the stand.
57
To Next Page
Loading...
