Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the hard drive.
6. Remove the system-board shield.
7. Remove the memory module.
8. Remove the wireless card.
9. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
10. Remove the heat sink.
11. Remove the system board.
About this task
The following image indicates the location of display panel and provides a visual representation of the removal procedure.
Removing and installing components 61
To Next Page
Loading...
