Back panel
1. USB 3.2 Gen 1 port with Power on/Wake-up support (2)
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. Wake the
computer from standby with the keyboard or mouse connected to this port.
NOTE: Set the BIOS Deep Sleep control to disabled to enable Wake up when the computer is powered off.
2. HDMI-in port
Connect a gaming console, Blu-ray player, or other HDMI-out enabled device.
3. HDMI port
Connect to a TV, external display or another HDMI-in enabled device. Provides video and audio output.
4. Power-adapter port
Connect a power adapter to provide power to your computer.
5. Network port
Connect an Ethernet (RJ-45) cable from a router or a broadband modem for network or Internet access, with a transfer rate
of 10/100/1000 Mbps.
6. USB 3.2 Gen 2 port with PowerShare
Connect peripherals such as external storage devices and printers.
Provides data transfer speeds up to 10 Gbps. PowerShare enables you to charge connected USB devices.
NOTE:
Connected USB devices will not charge when the computer is turned off. Please set BIOS Deep Sleep control to
disabled to start charging when the computer is powered off.
7. USB 3.2 Gen 1 port with Power on/Wake-up support
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. Wake the
computer from standby with the keyboard or mouse connected to this port.
NOTE: Set the BIOS Deep Sleep control to disabled to enable Wake up when the computer is powered off.
8. Universal audio jack
12
Views of Inspiron 24 5420 All-in-One
To Next Page
Loading...
