Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the speakers with the screw holes on the
computer base.
2 Tighten the screws that secure the speakers to the computer base.
3 Route the speaker cable through the routing guides.
4 Connect the speaker cable to the system board.
Post-requisites
1 Replace the computer base.
2 Replace the wireless card.
3 Replace the base cover.
44
To Next Page
Loading...
