Dell Inspiron 27 7000 All-in-One - 6 Removing the Back Cover; Prerequisite; Procedure

Removing the back cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisite
Remove the stand.
Procedure
1 Press and hold the tab on the back cover to release it from the latch on the system-board shield and slide the back cover in the
direction shown to release it from the middle frame.
2 Lift the back cover from the middle frame and the system-board shield.
6
Removing the back cover 21