Removing the system-board shield
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
Procedure
NOTE: Note the orientation of the system-board shield before removing it from the computer.
1 Remove the ve (M3x5) screws that secure the system-board shield to the display-assembly base.
2 Lift the system-board shield o the display-assembly base.
12
30 Removing the system-board shield
To Next Page
Loading...
