Dell inspiron 27 7000 - Replacing the stand; Procedure; Post-requisites

Identifier GUID-A1A7E0D7-52BF-4F80-84FE-DF5301AE97BA
Status Released
Replacing the stand
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-8E62DBB0-559F-4B2D-858A-F1656232760C
Status Released
Procedure
1 Align the screw holes on the stand with the screw holes on the middle frame.
2 Replace the six screws (M4x6) that secure the stand to the middle frame.
Identifier GUID-6C2AFA20-3736-4FA0-82F0-ADE9E9240AD7
Status Released
Post-requisites
Replace the back cover.
26