Identifier GUID-4EB11C22-0492-4F16-83CE-A64092ACEB01
Status Released
Removing the I/O bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B921E997-CD1E-4A7D-96D6-723B6E2D1F99
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
4 Remove the system-board shield.
Identifier GUID-915A57AD-90C0-4B2C-A9DA-C801411908C9
Status Released
Procedure
1 Remove the nine screws (M3x5) that secure the I/O bracket to the middle
frame.
96
To Next Page
Loading...
