Next steps
1. Install the display panel.
2. Install the power-button board with USB.
3. Install the stand hinges.
4. Install the microphones.
5. Install the speakers.
6. Install the system board.
7. Install the integrated heat sink or, discrete heat sink.
8. Install the M.2 2230 solid-state drive or, M.2 2280 solid-state drive, which ever applicable.
9. Install the wireless card.
10. Install the memory module.
11. Install the retractable-camera assembly.
12. Install the fan.
13. Install the media-card reader.
14. Install the system-board shield.
15. Install the hard drive.
16. Install the I/O cover.
17. Install the back cover.
18. Install the stand.
19. Follow the procedure in After working inside your computer.
Removing and installing Field Replaceable Units (FRUs) 97
To Next Page
Loading...
