Replacing the chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the chassis fan with the screw holes on the chassis.
2 Replace the four screws (#6-32xL6.35) that secure the chassis fan to the
chassis.
3 Route the chassis-fan cable under the bracket.
4 Connect the chassis-fan cable to the system board.
Post-requisites
1 Follow the procedure from step 5 to step 8 in “Replacing the optical drive”.
2 Replace the front bezel.
3 Replace the computer cover.
61
To Next Page
Loading...
