3. Slide the optical-drive assembly out of the optical-drive bay.
4. Remove the two screws (M2x3) that secure the optical-drive bracket to the optical drive.
5. Remove the optical-drive bracket from optical drive.
6. Pull the optical-drive bezel carefully to remove it from the optical drive.
Replacing the optical drive
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Removing and installing components 11
To Next Page
Loading...
