7 Connect the power-supply unit cable (P1) to the system board (ATX CPU).
8 Connect the hard-drive power cables to the system board (SATA PWR).
9 Connect the hard-drive power cable to the system board (SATA PWR).
10 Connect the hard-drive data cable to the system board (SATA 3).
11 Connect the hard-drive cable to the system board (SATA 0).
12 Connect the hard-drive data cable to the system board (SATA 1).
13 Connect the optical-drive data cable to the system board (SATA 2).
14 Connect the processor-power cable to the system board (ATX SYS).
58
Replacing the system board
To Next Page
Loading...
