12. Remove the fan and heat-sink assembly.
13. Remove the processor.
About this task
The following image indicates the slots and connectors on your system board.
1. power-button cable connector
2. media-card reader cable connector
3. system-board power cable connector
4. optical-drive data cable connector (SATA 3)
5. hard-drive power cable connector
6. hard-drive data cable connector (SATA 1)
7. M.2 2230 wireless-card slot
8. hard-drive data cable connector (SATA 0, boot drive)
9. memory-module slot (DIMM 3)
10. memory-module slot (DIMM 1)
11. M.2 2230/2280 solid-state drive slot
Removing and installing components
49
To Next Page
Loading...
