Appendix 169
3
Once this F2 prompt appears, press <F2> immediately.
NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can
appear very quickly, so you must watch for it to display, and then press <F2>. If you
press <F2> before you are prompted, this keystroke will be lost.
4
If you wait too long and the operating system logo appears, continue to wait
until you see the Microsoft
®
Windows
®
desktop. Then, shut down your
computer (see "Turning Off Your Computer" on page 100) and try again.
System Setup Screens
The system setup screen displays current or changeable configuration
information for your computer. Information on the screen is divided into
three areas: the options list, active options field, and key functions.
Options List — This field
appears on the left side of
the system setup window.
The field is a scrollable list
containing features that
define the configuration of
your computer, including
installed hardware, power
conservation, and security
features.
Scroll up and down the list
with the up- and down-
arrow keys. As an option is
highlighted, the Option
Field displays more
information about that
option and the option’s
current and available
settings.
Option Field — This field contains
information about each option. In this field
you can view your current settings and make
changes to your settings.
Use the right and left arrow keys to highlight
an option. Press <Enter> to make that
selection active.
Key Functions — This field appears below
the Option Field and lists keys and their
functions within the active system setup
field.
book.book Page 169 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
