Removing and Installing Parts 169
4
At the processor, place your finger upon the hook end of the release lever,
then push down and out to release it from the tab that secures it.
NOTICE: When replacing the processor, do not touch any of the pins inside the
socket or allow any objects to fall on the pins in the socket.
5
Gently remove the processor from the socket.
Leave the release lever extended in the release position so that the socket is
ready for the new processor.
1 processor cover 2 processor
3 socket 4 release lever
1
2
3
4
book.book Page 169 Monday, October 6, 2008 11:28 AM
To Next Page
Loading...
