Removing and Installing Parts 145
5
Disconnect the power and data cables from the back of the floppy drive.
6
Disconnect the data cable from the system board.
7
Press the two spring clamps and slide out the floppy drive along with the
FlexBay drive cage from the FlexBay slot.
8
Remove the two screws holding the floppy drive in the floppy drive cage.
1 floppy drive 2 spring clamps (2)
1 screws (2) 2 floppy drive cage
1
2
2
1
book.book Page 145 Monday, October 6, 2008 11:38 AM
To Next Page
Loading...
