84 Adding and Replacing Parts
www.dell.com | support.dell.com
Wireless Mini PCI Card
If you ordered a Mini PCI card with your computer, the card is already installed.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 75.
2
Remove the hinge cover. See "Hinge Cover" on page 88.
3
Remove the keyboard. See "Keyboard" on page 89.
4
If a Mini PCI card is not already installed, go to step 5. If you are replacing a Mini PCI card,
remove the existing card:
a
Disconnect the Mini PCI card from any attached cables.
b
Release the Mini PCI card by spreading the metal securing tabs until the card pops up
slightly.
c
Lift the Mini PCI card out of its connector.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
Mini PCI card
metal securing
tabs (2)
To Next Page
Loading...
