Adding and Replacing Parts 85
5
Install the replacement Mini PCI card:
a
Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI
card into the connector until it clicks.
NOTICE: To avoid damaging the Mini PCI card, never place cables under the card.
b
Connect the antenna cables to the Mini PCI card.
Coin-Cell Battery
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
1
Follow the procedures in "Before You Begin" on page 75.
2
Remove the hinge cover. See "Hinge Cover" on page 88.
3
Remove the keyboard. See "Keyboard" on page 89.
Mini PCI card
antenna cables
To Next Page
Loading...
