78 Adding and Replacing Parts
www.dell.com | support.dell.com
4
If a Mini PCI card is not already installed, go to step 5. If you are replacing a Mini PCI card,
remove the existing card:
a
Disconnect the Mini PCI card from any attached cables.
b
Release the Mini PCI card by spreading the metal securing tabs until the card pops
up slightly.
c
Lift the Mini PCI card out of its connector.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
securing tabs (2)
To Next Page
Loading...
