Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a
component.
NOTE: Screw color may vary with the conguration ordered.
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Base cover Palm-rest assembly M2x4 6
Battery Palm-rest assembly M1.6x4 1
Battery Palm-rest assembly M2x2 Big Head 4
Fan Palm-rest assembly M2x2 2
Display hinges Palm-rest assembly M2x3.5 5
Keyboard Palm-rest assembly M1.2x1.3 4
Keyboard bracket Palm-rest assembly M1.2x1.8 29
Power-adapter port Palm-rest assembly M2x3 1
Solid-state drive Palm-rest assembly M2x2 1
System board Palm-rest assembly M2x2 Big Head 4
Touchpad bracket Palm-rest assembly M1.6x2 3
Touchpad Palm-rest assembly M1.6x2 2
Wireless-card bracket System board M2x3 1
5
Screw list 13
To Next Page
Loading...
