Replacing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Using the alignment posts, place the battery on the palm-rest assembly.
2 Replace the four screws (M2x2) that secure the battery to the palm-rest assembly.
3 Replace the screw (M1.6x4) that secures the battery to the palm-rest assembly.
4 Connect the battery cable to the system board.
Post-requisites
Replace the base cover.
9
Replacing the battery 21
To Next Page
Loading...
