Dell Inspiron 7390 2n1 - 12 Removing the Power-Adapter Port; Prerequisites; Procedure

Removing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Remove the three screws (M2x3.5) that secure the left display hinge to the system board.
2 Lift the left display hinge from the system board.
3 Disconnect the power-adapter port cable from the system board.
4 Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
5 Lift the power-adapter port, along with its cable, o the palm-rest assembly.
12
26 Removing the power-adapter port