Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Procedure to replace M.2 2230 solid-state drive
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive rmly into the solid-
state drive slot at an angle.
2 Peel the tape from the solid-state drive bracket.
3 Adhere the solid-state drive bracket on the system board and secure the solid-state drive.
4 Replace the two screws (M2x3) that secure the solid-state drive to the palm-rest assembly.
Procedure to replace M.2 2280 solid-state drive
1 Align the notch on the solid-state drive/Intel Optane storage module with the tab on the solid-state drive slot.
2 Replace the screw (M2x2) that secures the solid-state drive/Intel Optane storage module to the palm-rest assembly.
19
Replacing the solid-state drive 35
To Next Page
Loading...
