Removing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Peel the tape that secures the speaker cable to the connector.
2 Disconnect the speaker cable from the system board.
3 Peel o the tapes and release the speaker cable from the routing guides on the palm-rest assembly.
4 Remove the speaker cable from the routing guides on the palm-rest assembly.
5 Lift the speakers o the palm-rest assembly.
24
Removing the speakers 41
To Next Page
Loading...
