3 Peel the tape that secures the display cable to the system board.
4 Open the latch and disconnect the display cable from the system board.
5 Peel the tape that secures the display cable to the system board.
6 Disconnect the power-adapter port cable from the system board.
7 Peel the tape that secures the speaker cable to the connector.
8 Disconnect the speaker cable from the system board.
9 Open the latch, and disconnect the keyboard cable from the system board.
10 Open the latch, and disconnect the keyboard-backlight cable from the system board.
11 Open the latch, and disconnect the touchpad cable from the system board.
12 Disconnect the coin-cell battery cable from the system board.
13 Peel the tape that secures the I/O-board cable to the system board.
14 Open the latch and disconnect the I/O-board cable from the system board.
15 Peel the tape that secures the touch-screen board cable to the system board.
16 Open the latch and disconnect the touch-screen board cable from the system board.
17 Open the latch and disconnect the ngerprint-reader cable from the system board.
50
Removing the system board
To Next Page
Loading...
