Using CDs, DVDs, and Other Multimedia 75
3 Insert the source CD that you want to copy into the CD-RW drive.
The Disc Copier project program briefly checks the source CD in the
CD-RW drive to ensure that it is a readable CD.
4 Click Copy.
Depending on the size of the files that are being copied, the copy
process may take a few minutes.
5 After the source CD is copied, remove the source CD from the
CD-RW drive tray.
The CD-RW drive tray opens automatically after the source CD is
copied.
NOTE: You must use
CD-R discs to burn music
CDs that you want to
play in regular stereos.
CD-RW discs do not play
in most home or car
stereos.
6
Insert a blank CD into the CD-RW drive and close the tray.
The recording starts automatically.
7 After the recording completes, click OK.
To Next Page
Loading...
