Product Safety, EMC & Environmental Datasheet
Page 3
VIII. PERFORMANCE DATA
System Configuration
The Energy Consumption and Declared Noise Emissions data is based on a configuration including:
Processor Intel Core Due P8600, 2.4Ghz
Hard Drive(s) One 500GB, 7200rpm
Power Supply(ies) 65 W
Energy Consumption
3
Service Level
Energy
Consumption
(Wattage)
BTU
Calculation
Description of Service Level
*Maximum 41.07 140.4594
The data provided is the highest wattage reading while
running an Industry Benchmark suite of tests.
Idle 17.22 58.8924
As specified by the EPA Computer spec 4.0 or system is
sitting at the main Windows screen.
ACPI-S3 “Standby”
Mode
1.24 4.2408 Suspend-to-RAM (low power mode).
ACPI-S4 “Hibernate”
Mode
0.833 2.84886
System is turned off with the Low power Mode feature
disabled via the BIOS.
Off Low Power Mode
Disabled
0.625 2.1375
AC adapter connected to mains with system detached
otherwise known as “No-load” condition
External Power
Supply
0.4093 1.399806
The data provided is the highest wattage reading while
running an Industry Benchmark suite of tests.
*Maximum Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed above.
Energy consumption is tested at 230 Volts / 50 Hz. Heat dissipation is calculated based on the measured watts, assuming the
service level is attained for one hour. Off data is not meant to show compliance to US Executive Order 13221. When applicable,
Dell product information related to US Executive Order 13221 may be obtained at: http://oahu.lbl.gov/index.html
.
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Service Level
Sound Power
(L
WAd
, bels)
(1 bel=10 decibels, re 10
-12
Watts)
Sound Pressure
Operator Position
(L
pAm
, decibels) (re 2x10
-5
Pa)
CD Drive Accessing N/A N/A
Hard Drive Accessing 3.4 28.3
Idle 3.5 28.2
3
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and
peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as
to accuracy or completeness is expressed or implied.
To Next Page
Loading...
