28 | B-CAS Card (Japan Only)
Replacing the B-CAS Card
Procedure
1 Connect the B-CAS-card cable to the connector on the B-CAS card.
2 Turn the B-CAS card over.
3 Align the screw hole on the B-CAS card with the screw hole on the middle frame.
4 Replace the screw that secures the B-CAS card to the middle frame.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 20.
2 Replace the stand. See "Replacing the Stand" on page 18.
3 Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4 Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 28 Monday, April 16, 2012 3:04 PM
To Next Page
Loading...
