46 | Wireless Mini-Card (Optional)
Procedure
1 Disconnect the antenna cable(s) from the Mini-Card.
2 Remove the screw that secures the Mini-Card to the system-board connector.
3 Lift the Mini-Card away from the system-board connector.
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. See "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer.
1 screw 2 Mini-Card
3 antenna cables (2)
book.book Page 46 Monday, April 16, 2012 3:04 PM
To Next Page
Loading...
