Processor 73
Processor
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Processor
Prerequisites
1
Remove the stand. See "Removing the Stand" on page 19.
2
Remove the back cover. See "Removing the Back Cover" on page 23.
3
Remove the VESA-mount bracket.
See "Removing the VESA-Mount Bracket" on page 43.
4
Remove the system-board shield.
See "Removing the System-Board Shield" on page 49.
5
Remove the processor heat-sink.
See "Removing the Processor Heat-Sink" on page 65.
OM_Book.book Page 73 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
