TV-In Port 99
Replacing the TV-In Port
Procedure
1
Slide the TV-in port along with its cable through the slot on the
I/O board shield.
2
Replace the hex nut that secures the TV-in port to the I/O board shield.
Postrequisites
1
Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 88.
2
Replace the I/O cover. See "Replacing the I/O Cover" on page 83.
3
Replace the B-CAS card. See "Replacing the B-CAS card" on page 27.
4
Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 79.
5
Replace the system-board shield.
See "Replacing the System-Board Shield" on page 51.
6
Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
7
Replace the back cover. See "Replacing the Back Cover" on page 24.
8
Replace the stand. See "Replacing the Stand" on page 21.
9
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 99 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
