WLAN card
Removing the WLAN card
1. Follow the procedure in Before working inside your computer.
2. Remove:
a. battery
b. hard drive
c. optical drive
d. base cover
3. To remove the WLAN card:
a. Disconnect the antenna cables from the WLAN card [1].
b. Remove the screw that secures the WLAN card [2].
c. Slide and lift the WLAN card from the slot [3].
Installing the WLAN card
1. Insert the WLAN card into the slot on the system board.
2. Tighten the screw to secures the cable holder.
3. Connect the antenna cables to the WLAN card.
4. Install the:
a. base cover
b. optical drive
c. hard drive
d. battery
5. Follow the procedure in After working inside your computer.
30
To Next Page
Loading...
