c. docking board
d. base cover
e. optical drive
f. hard drive
g. battery
4. Follow the procedure in After working inside your computer.
System fan
Removing the system fan
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. hard drive
c. optical drive
d. base cover
3. To remove the system fan:
a. Unroute the system fan cable [1].
b. Disconnect the system fan cable [2].
c. Remove the screw that secures the system fan to the computer [3].
d. Lift the system fan away from the computer [4].
Installing the system fan
1. Place the system fan into the slot on the computer chassis.
2. Tighten the screw to secure the system fan to the computer
3. Connect the system fan cable to the computer.
4. Route the system fan cable.
34
To Next Page
Loading...
