Option Description
This option is enabled by default.
Stealth Mode
Control
You can enable or disable the stealth mode.
This option is enabled by default.
Video screen options
Option Description
LCD Brightness Allows you to set the display brightness depending up on the power source (On
Battery and On AC).
NOTE: The video setting will be visible only when a video card is installed into the system.
Security screen options
Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard
drive password. Deleting the admin password automatically deletes the system
password and the hard drive password.
NOTE: Password changes take effect immediately.
By default, the drive will not have a password set.
System Password Allows you to set, change or delete the system password.
NOTE: Password changes take effect immediately.
By default, the drive will not have a password set.
Internal HDD
Password
Allows you to set, change or delete the password on the internal hard drive of the
system.
NOTE: Password changes take effect immediately.
By default, the drive will not have a password set.
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If user interface is enabled, Admin and System passwords must contain
at least one uppercase character, one lowercase character and be at least 8
characters long.
Password
Configuration
Allows you to determine the minimum and maximum length of Administrator and
System passwords.
77
To Next Page
Loading...
