Option Description
Password Bypass Allows you to enable or disable the permission to bypass the System and the
Internal hard drive password, when they are set. The options are:
• Disabled
• Reboot bypass
Default setting: Disabled
Password Change Allows you to enable or disable permission to the System and Hard Drive
passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when
an administrator password is set. If disabled the setup options are locked by the
admin password.
UEFI Capsule
Firmware Updates
This option controls whether the system allows BIOS updates via UEFI capsule
update packages.
NOTE: Disabling this option will block BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS).
TPM 1.2 Security Allows you to enable the Trusted Platform Module (TPM) during POST.
You can control whether the trusted platform module is visible to the operating
system. The option is:
CAUTION: For the TPM upgrade/downgrade process, it is recommended to
complete the process in an AC power with AC adapter plugged into the
computer. The upgrade/downgrade process without the AC adapter
plugged in might damage the computer or hard disk.
NOTE: Disabling this option does not chhange any settings you have made to
the TPM, nor does it delete or change any information or keys you may have
stored in the TPM. Changes to this setting take effect immediately.
Computrace Allows you to activate or disable the optional Computrace software The options
are:
• Deactivate
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed
Default setting: Deactivate
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
78
To Next Page
Loading...
