Dell Latitude 3150 - Removing the Keyboard

Installing the Keyboard Trim
1. Insert the keyboard trim to the keyboard until it snaps in its place.
2. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. battery
b. base cover
c. keyboard trim
NOTE: After removing the keyboard trim, flip the computer to access the keyboard cable.
3. Disconnect the keyboard cable from its connector on the system board [1] [2].
4. Flip the computer and remove the screws that secure the keyboard to the computer.
24