Option Description
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter
is removed during Standby, the system setup removes power from all the USB ports to conserve battery
power.
• Enable USB Wake Support
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the O state when triggered by a
LAN signal.
• Disabled
• WLAN
Default setting: Disabled
Wireless
Option
Description
WWAN/GPS Allows to enable/disable internal WWAN/GPS device.
Enabled by default.
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
• WLAN
• Bluetooth
All the options are enabled by default.
POST behavior
Option
Description
Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Extended BIOS
POST Time
Allows you to create an extra preboot delay. The options are:
• 0 seconds—enabled by default.
• 5 seconds
• 10 seconds
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
• Minimal—enabled by default
• Thorough
• Auto
34 System setup
To Next Page
Loading...
