Dell Latitude 3301 - Display Back-Cover

1 Adhere the camera to the display cable (tape) and connect the camera cable to the camera and turn it over.
2 Using the alignment post, turn the camera over and adhere to the display back-cover.
3 Adhere the tape that secures the camera to the display back-cover.
1 Install the display panel.
2 Install the display bezel.
3 Install the display assembly.
4 Install the WLAN card.
5 Install the battery.
6 Install the base cover.
7 Follow the procedure in After working inside your computer.
Display back-cover
Removing the display back-cover
NOTE
: This procedure is not applicable to computers shipped with a WWAN conguration.
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
4 Remove the WLAN card.
5 Remove the display assembly.
6 Remove the display bezel.
7 Remove the display hinges.
8 Remove thedisplay panel.
9 Remove the display cable.
10 Remove the camera.
60
Removing and installing components