3 Install the display panel.
4 Install the display hinges.
5 Install the display bezel.
6 Install the display assembly.
7 Install the WLAN card.
8 Install the battery.
9 Install the base cover.
10 Follow the procedure in After working inside your computer.
Display cable
Removing the display cable
NOTE: This procedure is not applicable to computers shipped with a WWAN conguration.
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
4 Remove the display assembly.
5 Remove the display panel.
6 Remove the display bezel.
The following image indicates the location of display cable and provides a visual representation of the removal procedure.
1 Peel o the tape securing the display cable to the back-cover.
2 Peel the display cable o the display back-cover.
62
Removing and installing components
To Next Page
Loading...
