b. microSD card
5. Follow the procedure in After working inside your computer.
Memory Module
Removing the memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
3. Disconnect the battery cable from the connector on the system board.
4. Pry apart the memory module latches [1].
5. Lift and remove the memory module from the system board [2].
Installing the memory module
1. Insert the memory module at an acute angle into its connector on the system board [1].
2. Gently push the memory module until the latches snap into place [2].
26
Disassembly and reassembly